Nvidia GeForce RTX 2080 and RTX 2080 Ti Overclocking Guide > Performance Results - gibbonsnamonsiver
Public presentation Results
Let's get a load at how overclocking improved the performance of the 2080 Ti and 2080, opening with a comparison of the Scanner API to our manual overclock.
For the 2080 Atomic number 2, the Scanner provided a 7% performance improvement over the Fe clocks, whereas our manual overclock produced a 12% advance. Notwithstandin the Scanner does non overclock the memory, and for those looking a quick overclock procedure, one easy trick might cost to use a fairly right memory overclock for simplicity's sake, something the likes of +600 MHz.
Going therewith changes the results and makes the Scanner + Memory overclock 11% faster than the FE clocks, merely again the choke-full manual overclock provides a slightly better result, a advance 1.5 percentage points.
For the 2080, information technology was a similar story. The Scanner gave us a 4% performance improvement over the Iron filaria, whereas our manual overclock boosted performance past 8%. Going away with a Scanner + computer storage overclock provided 7% more performance than the Atomic number 26 alfilaria.
We've shown that our manual overclock is slightly superior to the results with the OC scanner, now let's take back a look at a a few more games to see how the overclock compares to some stock and Founders Edition performance.
From those five games, including Shadow of the Grave Raider that we looked at earlier, for the 2080 Ti we achieved a public presentation improvement of 14% on the average compared to the stock clocks, and 10% compared to the Founders Edition clocks. For the RTX 2080 those margins were a trifle narrower: 11% over stock clocks and 9% over Founders Edition.
We're pretty much running into a great power point of accumulation here, looking the design of the tycoo livery system on the FE cards there might be a bit more headroom available if Nvidia properly unlocked voltage controls, but this is American Samoa good as we're getting from what we can configure at the moment.
We should mention that Nvidia Doctor of Osteopathy appear to glucinium binning their 2080 Ti GPUs. Artwork cards shipped with stock filaria use one SKU, piece those with factory OCs use a different, potentially binned SKU. This means that factory OC cards should overclock ameliorate than their non-OC alternatives.
In terms of temperatures and fan speeds, what Steve recovered in his initial review of the cards is spot on what I achieved along my test bench: core temperatures increase from 76C under load with the Founders Edition clocks, to 81C when overclocked, for both card game. That's a bit downstairs the cards' inborn 84C temperature limit and fortunate downstairs the increased 88C limit, so it's pretty clear that's non a modification factor for public presentation.
Fan speeds too, 2060 RPM with the FE clocks, 2290 Revolutions per minute when overclocked for the 2080 Ti and 2180 Rev for the 2080, using the default auto winnow speed. Soh a slight increase there merely no conflict to the sound visibility, the identity card is pretty quiet while overclocked. Also, both the noise end product and temperatures will be diverse with board mate models.
And if you're wondering about power pulmonary tuberculosis? Well there wasn't a lot of dispute in load mogul get betwixt the default and Founders Edition filaria, though that shouldn't be a huge surprise considering the FE clocks are but about 3% quicker. But when overclocked, power haul increases by around 13 to 15% on average for both card game compared to what the FE alfileria draw, thus that's a typical result considering the performance improvements.
RTX 2080 Cordyline terminalis Clock Speeds
RTX 2080 Time Speeds
If you're wondering about the actual time speeds I achieved with the 2080 Ti, I was averaging more or less 1680 MHz in Apparition of the Tomb Raider with the lineage clocks, 1770 MHz with the FE clocks, and 1980 MHz when overclocked, with a peak around 2100 MHz.
For the 2080, I was averaging around 1770 MHz with the stock clocks, 1865 MHz with the FE clocks, and 1990 MHz when overclocked, with a peak around 2010 Megahertz.
I also tried overclocking with the fan set to 100%, which dropped temperatures by 20C, and only got approximately 30 to 50 MHz many verboten of either card, and that was purely from GPU Hike; changing the clock offset resulted in instability. Track the fans at 100% resulted in less than a 1% encourage to performance over our manual OC with the fans on automobile, and of course, the card is much louder at 100% and so it's not worth it. However, those World Health Organization install liquid coolers on the calling card power be able to eek out a little of extra carrying into action, but not that much.
That wraps upwardly our look into RTX 2080 Ti and RTX 2080 overclocking. With the card game we have available in that location is some extra performance to squeeze out and it'll be interesting to see if anything Sir Thomas More can make up gained from additional tweaks, particularly special mods to growth voltage.
For first-string users though, roughly a 10% step-up concluded FE cards is expected, with manual overclocking still being the a-ok-to option, though Nvidia's Scanner API is rather handy for those that want to avoid manual tweaking.
Shopping Shortcuts:
- GeForce RTX 2080 Ti on Amazon, Newegg
- GeForce RTX 2080 on Virago, Newegg
- GeForce GTX 1080 Ti on Virago, Newegg
- GeForce GTX 1080 on Virago, Newegg
- GeForce GTX 1070 on Amazon, Newegg
- GeForce GTX 1060 on Virago, Newegg
Source: https://www.techspot.com/article/1704-geforce-rtx-2080-overclocking/page2.html
Posted by: gibbonsnamonsiver.blogspot.com
0 Response to "Nvidia GeForce RTX 2080 and RTX 2080 Ti Overclocking Guide > Performance Results - gibbonsnamonsiver"
Post a Comment